Tablet Is Busy Try Again Later

one.  Abolish whatever print jobs that may take been sent to the printer from the computer.

     - If unsure how to cancel the print jobs on your computer, refer to Cancel a print job - Windows or Macintosh, then proceed to step ii.

2.  Is at that place a telephone cord or interface cable connected to your machine?

     - If yes , disconnect the cable(south) from the motorcar.  In one case the cable(s) has been disconnected, go to step 3.

     - If no , get to step 3.

3.  Is your machine connected direct to a wall outlet or a surge protector?

     - If a wall outlet , go to footstep 4.

     - If a surge protector , go to step v.

4.  Unplug your automobile from the wall outlet and leave it unplugged for i full minute.  Plug information technology dorsum into the wall outlet.  Get to step 6.

five.  Unplug your motorcar from the surge protector and go out it unplugged for i total minute. For testing purposes, instead of plugging it back into the surge protector, the machine needs to be plugged directly into a wall outlet. This helps to decide whether the effect is related to the device or the Brother machine.  Go to step 6.

note icon Brother strongly recommends you connect your machine to a surge protector to protect it against power surges and lightning. In particular, we suggest you apply a surge protector that is compatible with both standard Air-conditioning power cords and phone cords.  Surge protectors equipped with phone jacks will help to insulate your car from power surges that might travel through the telephone line.

half dozen.  After the machine powers up, do one of the following:

     - If the display has the date and time, go to pace 7.

     - If the "Busy, attempt once more after" bulletin continues to appear, go to step 8.

seven.  Test by printing a User Settings Listing.

     a.  Press Settings Icon on the Touchscreen.

     b.  Press All Settings.

     c.  Press ▲ or ▼ to display Impress Reports.  Press Print Reports.

     d.  Printing ▲ or ▼ to display User Settings.  Press User Settings.

     e.  Press OK.

          - If the machine prints the User Settings List with no error, printing Home Icon.  The outcome has been resolved.

          - If the "Decorated, try again later" bulletin reappears, go to step 8.

8.  Unplug your machine once more from the wall outlet.  This fourth dimension but for thirty seconds, then plug information technology back into the wall outlet.  Go to step nine.

9.  After the machine powers upwardly, perform a machine reset.

a.  Press Fax on the Touchscreen to illuminate the LEDs on the Touchpanel.

     b. Press and hold Image (for approximately 7 to 10 seconds) on the Touchpanel until the brandish changes to show the Series #, ROM Version and Pages printed.

     c.  Press and hold the blank rectangle below 3. Impress Page until a numerical chart appears on the display .

Maintenance

          - The Touchscreen LCD will display a numerical, alphabetical or motorcar function chart. The example below is the numerical chart.

Maintenance

     d. Press the *, 0, #, (1 correct after the other) on the Touchscreen keypad in this order.  The touchscreen should display '0 Maintenance' in the elevation left corner.

          - If a condition message (example 'Ink Low') or an error message (example 'No Cartridge') appears, you can proceed.

Maintenance

     e.  Printing ix,i on the Touchscreen keypad.

          - The LCD volition display 'SELECT 91?'

     f. Press Mono Showtime .  The screen will briefly display 'PARAMETER INIT' .

     g.  In one case washed, the machine will get back to the grid of numbers.

          - Press ix, 9 to get out Maintenance Mode.  The printer will restart automatically, so go back to the main menu.

10.  Later on the machine powers upwardly, do one of the following:

     - If the display has the date and time, become to step 11.

     - If the "Busy, attempt once again later" message continues to appear, your automobile volition crave service.  Go to Warranty and Service Options.

11. Exam past printing a User Settings List.

     a.  Printing Settings Icon on the Touchscreen.

     b.  Press All Settings.

     c.  Press ▲ or ▼ to display Print Reports.  Press Print Reports.

     d.  Press ▲ or ▼ to display User Settings.  Printing User Settings.

     due east.  Printing OK.

          - If the machine prints the User Settings List with no mistake, press Home Icon.  The effect has been resolved.

          - If the "Busy, effort again later" message reappears, your machine will require service.  Go to Warranty and Service Options.

Warranty and Service Options:

Your motorcar has a two-year limited exchange warranty.  Check the warranty status of your car by clicking on the Machine Warranty Calculator.

If in warranty, contact Brother Customer Back up or locate a Brother Authorized Service Center to schedule product replacement or repair.

If out of warranty, locate a Brother Authorized Service Eye.  Repair fees might apply for out-of-warranty products.

weberamas1978.blogspot.com

Source: https://help.brother-usa.com/app/answers/detail/a_id/75903/~/busy%2C-try-again-later

0 Response to "Tablet Is Busy Try Again Later"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel